Product Description:
Can produce all kinds of customized industrial remote control, can
be used for pumping machinery, high altitude machinery, lifting
machinery, port machinery, coal mining machinery and other kinds of
special industrial applications. Remote control category: handheld
and strap, 1, handheld remote control, twelve buttons, with 1.35
inch display, 2, strap, large size and small size two, can be
installed linear handle, universal handle, button switch and
button, can choose 2.42 inch, 3.5 inch, 4.3 inch screen. 3,
receiver, can choose voltage and current type input and output, can
be compatible with 232,485, can, modbus and other bus output
| Safety instructions |
| Please read this manual carefully before using the wireless remote
control system. The manual is applicable to the safety of the
wireless remote control system Installation, commissioning and
maintenance. |
| Application |
| ★ Wireless remote control system is used to control the machine and
data transmission, please follow the occupational safety
instructions when using. |
| ★ Do not use the wireless remote control system in areas with
explosion risks. |
| Starting remote control system |
| 1. Put the charged battery into the battery slot on the back of the
transmitter; |
| 2. Release the emergency stop switch; |
| 3. Turn on the power switch, the transmitter will make a “di” sound
when it is turned on; |
| 4. Connect the power terminal of the receiver to the 12-36V DC
power supply; |
| 5. After the transmitter and receiver are connected to the signal,
the wireless communication indicator light of the receiver is
steady on. |
| Batteries and chargers |
| Battery |
| The actual capacity of the battery depends on the delivery time,
service time and ambient temperature, and will decrease with the
increase of service times. The battery capacity will decrease
rapidly when the operating temperature is lower than 0℃or higher
than 40℃. |
| Notes: |
| ★ For the battery stored for more than 3 months, please fully fill
before using, three to five times after charging the battery
capacity reach to Optimum |
| ★ Please charge the battery in the range of 0-40℃ and store the
battery at normal temperature. |
| Rational use of batteries, charging times more than 300. |
| Battery charger |
| According to customer demand, the battery charger can be divided
into AC and DC charger: |
| Three LED indicator lights indicates the actual charging state of
the battery: |
| ★ Green LED on: Charging is complete. |
| ★ Orange LED on: charging is underway |
| ★ Red LED on: The battery has been deeply discharged or the battery
has been damaged. |
| Technical Parameters |
| Operating voltage | 100-240VAC 10-30VDC |
| Charging time | 2-3h |
| Operating temperature | 10-40℃ |
Customization:
Concrete Pump Remote Customization Service
Brand Name: Construction Machinery
Model Number: Instead of HBC
Place of Origin: China
Standby Time: 20 Hours
Communication Distance: Greater Than 150 Meters
Operating Frequency: 433-490MHz
Functions: Start/Stop, Forward/Reverse, Emergency Stop, etc.
Housing Material: PA6+GF30
Key Words: Wireless Remote for CIFA concrete pump Sany Concrete
Pump, Zoomlion Concrete Pump Remote Controller
